| The successor to the industry-leading XAP 800. As the flagship product in ClearOne's next-generation ConvergeTM Pro professional audio conferencing product line, the 880 is a complete audio system that delivers rich functionality with improved audio performance, enhanced management, and simplified configuration for audio conferencing and sound reinforcement applications. |
| |
ClearOne Converge Pro 880 Specifications |
| Audio Performance |
| Conditions | Unless otherwise specified, all measurements are performed with a 20 Hz to 22 kHz BW limit (no weighting) |
| Frequency Response | 20 Hz to 22 kHz ±1dB |
| Noise (EIN) | -126 dBu, 20 kHz BW, max gain, Rs=150Ω |
| THD+N | <0.02% |
| Dynamic Range | 100 dB (non A-weighted) |
| Crosstalk | <-91 dB re 20 dBu @ 20 kHz channel to channel |
| Auto Mixer Parameters |
| Number of Open Microphones (NOM) |
| PA Adaptive Mode |
| First Mic Priority Mode |
| Last Mic Mode |
| Maximum # of Mics Mode |
| Ambient Level |
| Gate Threshold Adjust |
| Off Attenuation Adjust |
| Hold Time |
| Decay Rate |
| Matrix Mixing Parameters |
| Matrix | 36x36 |
| Analogue In/Out | 12 |
| Expansion Bus | 12 in/out |
| Processing Blocks | 8 assignable in/out |
| Fader Block | 4 assignable in/out |
| Assignable Processing Blocks |
| Filters | All pass |
| Low pass |
| High pass |
| Low shelving |
| High shelving |
| Parametric EQ |
| Notch |
| CD Horn |
| Crossovers | Bessel |
| Butterworth |
| Linkwitz-Riley |
| Compressor | Delay; adjustable up to 250 ms |
| Assignable Fader Blocks | Gain/Mute |
| Microphone Input |
| Configuration | Input Gain Adjust |
| Mic or Line Level |
| Phantom Power on/off |
| Echo Cancellation on/off |
| Noise Cancellation on/off |
| Filters | All Pass |
| Low Pass |
| High Pass |
| Notch |
| PEQ |
| Mute | on/off |
| Chairman Override | on/off |
| AGC | on/off |
| Automatic Level Control | on/off |
| Auto Gate/Manual gate | Yes |
| Adaptive Ambient | on/off |
| Pre AEC channel | Yes |
| Mic/Line Inputs 1-8 |
| Type | Push-on mini-terminal block, balanced, bridging |
| Impedance | < 5 KΩ |
| Nominal Level | adjustable -56 dBu to 0 dBu (7dB step coarse gain adjustment) |
| Maximum Level | -65 dBu to +20 dBu |
| Echo Cancellation | 130 ms tail time (works with 12 dB of room gain) |
| Noise Cancellation | 6-15 dB attenuation |
| Phantom Power | 24 V, selectable |
| Line Inputs 9-12 |
| Type | Push-on mini-terminal block, balanced, bridging |
| Impedance | < 5 KΩ |
| Nominal Level | 0 dBu |
| Maximum Level | 20 dBu |
| Outputs 1-12 |
| Type | Push-on mini-terminal block, balanced |
| Impedance | < 50 ? |
| Nominal Level | 0 dBu |
| Maximum Level | 20 dBu |
| Expansion Bus In/Out |
| Type | Proprietary Network |
| RJ-45 (2), 1.9 Mbps |
| Category 5 twisted-pair cable, 200' maximum cable length between any two Converge Pro devices |
| Ethernet |
| Type | Autoswitching with Quality of Connection(QoC) |
| 10/100 Mbps Ethernet Network Port |
| 10/100 Mbps Ethernet PC Port |
| RJ-45 Connectors |
| RS-232 |
| Type | Serial Command Protocol Only (Console software not supported on RS- 232 port) |
| DB-9 female 9,600/19,200/38,400/57,600/115,200 baud rate; 8 bits,1 stop bit, no parity Hardware flow control on (default)/off |
| USB |
| Type | Version 2.0 Compatible |
| B-connector |
| Control/Status Ports |
| Type | DB-25 female A/B (2) |
| Inputs A/B | active low (pull to ground) |
| Outputs A/B | open collector, 40 VDC max, 40 mA each |
| +3.3 VDC pins (2) (300 mA over-current protected) |
| Configuration & Administration Software |
| Supplied | Converge™ Console |
| General |
| Power Input Range | Auto-Adjusting 100-240 VAC; 50/60 Hz |
| Power Consumption | 30 W Typical |
| Dimensions (L x D x H) | 17.25" x 10.25" x 1.75" |
| 43.8 x 26 x 4.5 cm |
| Weight | 7.5 lbs/3.3375 kg unit weight |
| 12 lbs/5.4kg shipping weight |
| Operating Temperature | 14° F/-10 °C to 122° F/50° C ambient unit temperature |
| Approvals & Compliance | AES48-2005 | AES standard on interconnections - Grounding and EMC practices - Shields of connectors in audio equipment containing active circuitry (self certified) |
| U.S.A. & Canada |
| CSA safety listed |
| EU Countries |
| RoHS compliant |
| WEEE compliant |
)
