Kramer VP-108 1:8 VGA/XGA Audio Distribution Amplifier with output Disable
The KRAMER VP-108 is a high-performance 8-channel distribution amplifier for VGA/XGA and stereo audio (balanced or unbalanced). The machine uses 15-pin HD connectors for the VGA-type signals, and detachable terminal block connectors for the audio. The unit is unique in that each of the 8 VGA outputs, and each of the 8 stereo audio outputs, may be individually enabled or disabled, replacing a switcher which would typically be used in such setups. RS-232 and/or RS-485 may be used for control (switching) of the outputs, and the output configuration is stored in non-volatile memory so that the machine will restore its power-down status when power is returned. Solid-state electronic switching, and low-noise amplifying circuitry are used throughout the unit, and the sync pulses are detected and reconstructed before amplifying and buffering to the outputs. The high video bandwidth ensures that the unit remains transparent even at the highest resolution VGA modes such as XGA. The machine is housed in a rugged, professional enclosure requiring one vertical rack space in a standard 19 inch rack.
Kramer VP-108 Applications
All graphics and presentation distribution applications.
Applications where individual signal muting controlled by RS-232 commands is required.
Kramer VP-108 Features
High Bandwidth - 400MHz (-3dB).
HDTV Compatible.
Control - RS-232 & Contact Closure for individual output disconnect.
Audio Level (Gain) Controls.
Looping Input.
Selectable Input Signal Termination.
Standard 19” Rack Mount Size - 1U.
Kramer VP-108 Specifications
Input
1 XGA on an HD15F connector; 1 LOOP on an HD15F connector. 1 balanced audio + 4dBm 100k? on detachable terminal block connectors. 8 XGA on HD15F connectors.