Kramer VP-111 1:1 XGA Line Driver with monitor loop (HD15 in/out)
The Kramer VP-111 is a high performance line driver for VGA/XGA signals. It accepts one input, provides correct buffering and isolation, loops it out to a local monitor or another acceptor, and outputs an amplified and equalized signal to a remote acceptor. Due to its large bandwidth and driving power, the machine can drive very long high-resolution lines, (up to 100 meters (300ft.) using good quality cable). The machine provides cable equalization control using a recessed trimmer on the back panel; has a switch on the front-panel for input signal termination, and a switch on its underside for ID bit control. Video bandwidth exceeding 470MHz ensures that the VP-111 remains transparent even at the highest resolution QXGA modes. It is ideal for remote monitor applications, or presentation systems requiring a local monitor and a large screen display such as a projector at close or remote locations. A 12V power supply is included. The VP-111 is part of the Kramer TOOLS family of compact, high quality, and cost effective solutions for a variety of applications.
Kramer VP-111 Applications
Dual monitor systems - local and remote.
Presentation systems - for remote transmission and cable equalization.
Kramer VP-111 Features
High Bandwidth - 470MHz (-3dB).
HDTV Compatible.
EQ (Peaking) Control.
Looping Input.
Selectable Input Signal Termination.
ID Bit Control.
Compact Size - Part of the Kramer TOOLS™ family of compact, high quality and cost effective solutions.
Kramer VP-111 Specifications
Input
1 x VGA/UXGA on an HD15F connector.
Outputs
1 x VGA/UXGA, 1 x VGA/UXGA loop on HD15F connectors.
Max. Output Level
1.9 Vpp/480MHz.
Bandwidth (-3Db)
470MHz.
Diff. Gain
0.08%
Diff. Phase
0.2 Deg.
K-Factor
0.05%.
S/N Ratio
73.5 dB.
Controls
0 to +11.3 dB, EQ. control @ 50 MHz. ; Loop termination switch.
Coupling
DC.
Power Source
12 VDC, 100 mA.
Dimensions
12 x 7.5 x 2.5 cm (4.7” x 2.95” x 0.98”), W, D, H.